Reverse osmosis water ultrafiltration system

Ultrafiltration system with reverse osmosis and an electrodeionizer for ultrapure water

Evoqua Protegra CS RO/EDI
water treatment system

Laboratory water system with reverse osmosis for obtaining demineralized water

Reverse osmosis systems Protegra CS RO/EDI are designed to meet the demand for obtaining large volumes of demineralized water. Using these systems, purified water is obtained for use in various fields. When the Protegra CS® RO system works in tandem with an electrodeionization cell, the quality of the water produced is significantly improved.
The compact design, high quality components and intelligent control system make these devices cost effective. A distinctive feature of these industrial systems is the constant quality of purified water. The conductivity of water produced by single-phase systems is < 0.1 µS/cm, the value of this indicator is < 0.07 µS/cm when using two-phase systems. Content of total organic carbon <30 ppb.

Typical use of systems
• Preparation of feedwater for
ultrapure water production systems.
• General chemistry
• Liquid preparation for laboratory
washers
• Feed water for autoclaves
• Feed water for climate
chambers
• Preparation of buffer solutions
• Photometry
• Spectrophotometry
• General chemical analysis
• Protein electrophoresis
• Preparation of microbiological
nutrient media
• Electrophoresis

Areas of use
• Microbiology
• Electronics
• Optics
• Semiconductors
• Pharmaceuticals
• Chemistry
• Clinical analyzes
• Power stations
• Glass industry
• Electroplating

Characteristics of the device, made in a closed case

Protegra CS RO 200 Protegra CS RO 500 Protegra CS RO 750 Protegra CS RO 1000
Flow rate l/h 200 500 750 1000
Min. deviation % 98 98 98 98
Max. recovery rate % 75 75 75 75
Max. operating pressure bar 14 14 14 14
RO module quantity 1 3 4 4
Power supply V / Hz 230 / 50 3 x 400 / 50 3 x 400 / 50 3 x 400 / 50
Power consumption kW / h 0.55 0.55 1.6 1.6
Dimensions (HxWxD) mm 1650x600x550 1650x600x550 1650x600x550 1650x600x550
Weight kg 120 140 172 192

Characteristics of the device in frame design

Protegra CS RO 200 Protegra CS RO 500 Protegra CS RO 750 Protegra CS RO 1000
Flow rate l/h 200 500 750 1000
Min. deviation % 98 98 98 98
Max. recovery rate % 75 75 75 75
Max. operating pressure bar 14 14 14 14
RO module quantity 1 3 4 4
Power supply V / Hz 230 / 50 3 x 400 / 50 3 x 400 / 50 3 x 400 / 50
Power consumption kW / h 0.55 0.55 1.6 1.6
Dimensions (HxWxD) mm 1650x600x550 1650x600x550 1650x600x550 1650x600x550
Weight kg 120 140 172 192