Laboratory water filtration system Evoqua Ultra Clear

Tap water treatment system + reverse osmosis purification membranes

Evoqua Ultra Clear RO
water treatment system

Laboratory water purification system that produces pure water for laboratories

The Ultra Clear RO model range allows you to get high quality water with low energy consumption. Thanks to the use of "energy-saving" membranes, the operation of these systems is highly efficient and economical. High requirements for the materials used and high-quality performance guarantees a long service life of the device. In Ultra Clear RO systems, an almost noiseless pump is installed, made according to a new technology without using a traditional electric motor. The automatic membrane wash option allows the use of untreated tap water as feed water. Applying a reduction in water hardness, you can get a degree of recovery up to 75%.
The system allows you to recover up to 50% of water and save a supply of treated water. If necessary, a certain amount of water stored in storage tanks can be obtained from a reverse osmosis system. The storage tank can also be used to supply water to other laboratory equipment. Also, the tank allows in the shortest possible time to obtain a larger volume of treated water than the reverse osmosis system is able to produce at the same time. The presence of a storage tank is a guarantee that the treated water will be available at the first need. For optimal and productive system operation, the proper tank size and system configuration will be recommended based on the goals and the required volume of water. The standard volume of tanks is 30, 60 and 80 liters. Tanks with sizes up to 3,000 liters are available on request.

• Preparation of feedwater for laboratories and ultrapure water systems
• Preparation of buffer solutions
• Feed water for autoclaves and climate chambers
• In general chemistry
• For washing machines in laboratories, as liquid for final rinsing

Specification Ultra Clear RO 20 Ultra Clear RO 30 Ultra Clear RO 60 Ultra Clear RO 100
Performance l/h 20 30 60 100
Salt removal percentage % 98 98 98 98
Bacteria removal percentage % 99 99 99 99
Particle removal percentage % 99 99 99 99
Product water characteristics
Pressure bar 2-6 2-6 2-6 2-6
Conductivity µS/cm 2-6 2-6 2-6 2-6
Silt Density Index SDI < 12** < 12** < 12** < 12**
Free chlorine mg/l < 0.1 < 0.1 < 0.1 < 0.1
Total iron mg/l < 0.1 < 0.1 < 0.1 < 0.1
Weight kg 32 32 33 35
Power consumption kW / h 0.2 0.2 0.2 0.2
Power supply V / Hz 240/50 - 60 240/50 - 60 240/50 - 60 240/50 - 60
Dimensions (HxWxD) mm 530 x 340 x 420 530 x 340 x 420 530 x 340 x 420 530 x 340 x 420