Evoqua LaboStar ™ PRO water treatment system
Laboratory water treatment system for deionized / distilled water
Evoqua LaboStar ™ PRO
water treatment system
Laboratory system of ultrapure water, reverse osmosis and deionization
LaboStar ™ PRO is a cost-effective solution for the production of analytical grade pure water. This very compact ultrapure water system can be installed on a desktop in a laboratory. The product water has the following quality indicators: conductivity of 0.055 μS/cm (electrical resistance equal to 18.2 MΩ*cm); total organic carbon content <10 ppb. Water produced by models with a UV - oxidation (UV) module has a total organic carbon content in the range of 1 to 5 pbb. The product water exceeds all quality standards for laboratory water, including: STM Type 1, CLSI and ISO 3696 Type 1. Both deionized water and distilled water, or the filtrate obtained by operating a reverse osmosis system can be used as feed water. Selected water treatment materials and 4 modules, including the DI after-treatment module used in LaboStar PRO, ensure that treated water meets the highest quality standards. Water quality indicators in the recirculation circuit are continuously measured by a conductivity sensor. A positively charged 0.2 µm sterile filter built into the dispenser holds bacteria and endotoxins. This allows you to produce pure water with a level of endotoxins < 0.001 EU/ml, eliminating the need to use an expensive ultrafilter. An uncharged 0.2 µm sterile filter is also available.
Benefits of LaboStar PRO system
• Ultrapure water feed directly to dispenser
• The dispenser is practical and convenient to use
• Existence of silent work mode
• Fast disinfection process
• Quality control at each stage of cleaning
• Built-in pressure regulator
• Fast module replacement due to quick connectors.
• Protective cover at the end of the sterile filter
Benefits of LaboStar PRO UV 4 system
• Built-in tank 7 liters
• System mobility
• Ultrapure at your disposal just a few minutes after filling the tank
| Ultrapure water characteristics | LaboStar PRO DI 2 | LaboStar PRO DI 4 | LaboStar PRO UV 2 | LaboStar PRO UV 4 | |
| Flow rate | l/min |
1.5* |
1.5* | 1.5* | 1.5* |
| Conductivity | µS/cm | 0.055 | 0.055 | 0.055 | 0.055 |
| Resistivity | MΩ*cm | 18.2 | 18.2 | 18.2 | 18.2 |
| TOC | ppb | 5 - 10 | 1 - 5 | 1 - 5 | 1 - 5 |
| Bacteria | cfu/ml | <1** | <1** | <1** | <1** |
| Endotoxins | EU/ml | <0.001** | <0.001** | <0.001** | <0.001** |
| Particles > 0.2 µm | per ml | <1 | <1 | <1 | <1 |
| Product water characteristics | |||||
| Pressure | bar | 0.1 - 6 | - | 0.1 - 6 | - |
| Initial conductivity | µS/cm | <20 | <20 | <20 | <20 |
| Silt Density Index | SDI | <12*** | <12*** | <12*** | <12*** |
| TOC | ppb | <50 | <50 | <50 | <50 |
| Free chlorine | mg/l | <0.1 | <0.1 | <0.1 | <0.1 |
| Total iron | mg/l | <0.1 | <0.1 | <0.1 | <0.1 |
| CO2 | mg/l | <15 | <15 | <15 | <15 |
| Water temperature | °C | 5-35 | 5-35 | 5-35 | 5-35 |
| Environment temperature | °C | 5-35 | 5-35 | 5-35 | 5-35 |
| Power requirements | |||||
| Power consumption | W | 270 | 270 | 270 | 270 |
| Power supply | V/Hz | 100 - 240 V /50 - 60 Гц | 100 - 240 V /50 - 60 Гц | 100 - 240 V /50 - 60 Гц | 100 - 240 V /50 - 60 Гц |
| Dimensions (HxWxD) | mm | 535x400x410 | 535x400x410 | 535x400x410 | 535x400x410 |
| Weight | kg | 21 | 24 | 23 | 24 |